It's a Snowman Invasion!!!

Only one snowman is finished, and I'm sure you can tell which one that is. These are fun and easy to make: just get a jar, paint the inside white, allow to dry, fill halfway up with sand, paint a styrofoam ball white, glue to top of jar. (The short snowman is an old-fashioned light bulb, covered with PaperClay.)

I made the noses with PaperClay, and I poked a toothpick up inside them while they were still soft, (and then removed it). When the noses were dry,  I glued a tooth pick inside each one, and painted the nose orange. 

When the paint was dry, I  put a little glue on the back surface of the nose, and pushed the toothpick inside the head. Using a toothpick inside the nose takes a little longer, but you will be rewarded with a nose that will not break/fall off easily.

Do the rest as you choose. Some of mine have cloth hats (toes of socks make great, no-sew hats), some have mouthwash cap hats with margarine-tub plastic brims. You can also use premade straw hats, cowboy hats, etc. You can make neat hats out of felt, too. Or you can leave your snowman hatless. I like mine to have pink cheeks, so they look healthy! I like buttons on the front of mine--you probably noticed that.

Anyway, have fun with these! Do them with kids! Everyone will have fun.

Cloth over the PaperClay Shouldhead Now

You will laugh when I tell you what I used for her cloth overlay. I wanted the thinnest knit fabric I could find, so I went to my underwear drawer and found the rattiest, thinnest, most worn pair of underpants I could find. They were pretty shabby, but just what I needed to use on this shoulderhead.

I use a brush to spread Elmer's Glue on the head, making sure to get the glue in every crack and crevice. Then I lay on the fabric and stretch it just a little where it needs to be to lie pretty flat. I trim off parts of the fabric, and make the cut piece lay against the adjacent piece as well as is possible.

I will use gesso next, perhaps a couple of coats will be necessary, and sand lightly in between coats, and after the final coat.

Made a Hitty Shoulder Head tonight.

The head part is about an inch high, and the measurement from chin to bottom of shoulderplate is probably an inch and a quarter. She's going to be a Hitty so she should be about seven inches high when done. I will make her a cloth body and probably cloth arms and legs, too. I will probably cover the head and shoulder plate with thin cloth before I paint it. Cloth adds strength to the Paper Clay.

A New Peg Wooden

I have added another peg wooden doll to my collection (of two).These dolls were also,  mistakenly, called "Dutch ' dolls," a misunderstanding of "Deutch" dolls, meaning "German" dolls. They were made in Grodner Tal (valley) in Bavaria, which, at times, has been part of Austria and other times part of Germany. They were made in sizes from 1.5" to 17" and I believe that one person painted them all, as they all certainly look "related."  The two dolls I own are both 11.5" tall, and many I've seen for sale are also this size, so I am assuming that perhaps more were made in this size than any other. The dolls were quite crudely made, turned on a lathe,  of wood that reminds me of kindling!  They were always sold without clothing. The paint used contained lead, and, according to an article I have, the woman who painted them used one color a day, so the paint had time to dry overnight.

   I had never seen these dolls before I was shown a couple by a friend, but later, in reading Beatrix Potter's Tale of Two Bad Mice, I noticed one of the doll house dolls was a peg wooden named "Jane." So I named my first pegwooden (below) "Jane," too. She was given to me by my friend, who had two, and she gave me Jane in return for making an outfit for the doll she kept.

  These dolls were often sold in "Penny Stores" in Britain, the equivalent of our "Five and Dimes." Queen Victoria and her governess dressed many of these dolls after characters they saw in plays or operas. I really like these dolls because they are quite simple and  were made to be purchased by "regular"  folks who could not afford the more elaborate china head dolls that were available during the same time period (1850-1900).

Funny Duck!!

Actually, this duck is not left over from Halloween, nor is he traveling incognito. What he IS doing is holding a Hitty Face until it dries (I hope I can get it off easily tomorrow--I didn't put any plastic wrap under the clay like I usually do).  I use PaperClay because I really HATE Sculpey. I don't like having to bake it and I don't like how brittle it becomes, either. I also don't like how hard it is to wash off my hands or how heavy it is. Do you get the idea that I REALLY DON'T LIKE SCULPEY??!!

 I DO, however, LOVE PaperClay. It is light, it air dries, and although it has a tendency to crack, this doesn't matter to me because I always use it under cloth. I am also experimenting with using a face mold lined with knit cloth soaked in gesso and with just a thin layer of paper clay over that--the paper clay will be BEHIND the face when I remove it from the mold. I have used PaperClay behind my last couple Alabama Babies' faces, but I used quite a thick layer of it, and it made the babies' faces heavier than I wanted them to be, although much lighter than the plaster of paris that I first used, or the Sculpey I tried after that. Making dolls is an evolutionary process, which is one reason I like making them so much. There is no end to the things you can try and the places you can go.

Finished Sock Monkey for Hittys

He is sewn from Red Heel Sock scraps. I used satin stitch with red embroidery floss to make his smile. Although Hitty Connie doesn't look very happy, she LOVES her sock monkey.

Show and Tell Site At Doll Collectors

I posted the story of my pegwooden Jane there, and how I came to get her:

http://www.collectorsweekly.com/stories/34665-another-peg-wooden-doll

Other doll makers/collectors  might like to go there and post some pictures, too. It's always interesting to read stories about other peoples' dolls.